We have designed, tested and qualified Smartpipe to API 15s second edition. 

Smartpipe uses materials with demonstrated performance in various industries.  We have carried out long term customer driven testing for oil, gas, condensate, fuel, and various types of chemicals. 

High pressure, large diameter, right of way constrained applications where existing infrastructure is in need of replacement. 

 We currently manufacture and install in excess of 3 miles of continuous lengths up to 2,000 psi and nominal diameters from 6in to 16in.   

Every Smartpipe installation to date has been installed either under a state issued waiver vetted by PHMSA or as a special permit issued directly from PHMSA. To date, the only class 3 special permits issued to pipeline operators for composite pipe are for Smartpipe projects. 

By manufacturing Smartpipe onsite, we eliminate the transportation constraints associated with reels, which can limit both pipe diameter and continuous installation length. This enables longer continuous pulls with fewer intermediate connections, reducing excavation and right of way disruption. 

Smartpipe is manufactured and simultaneously installed at a rate of 3-4 ft/minute. 

Smartpipe has designed and fully qualified a robust compression connector system.  These connectors are carbon steel, stainless steel, or CRA. 

Smartpipe has a fiber optic monitoring solution that is integrated into the body of the system.  This allows for real time 24/7 monitoring for 3rd party intrusion and leak detection.   

As the Smartpipe system is being manufactured on site, it is pulled through an existing host pipe utilizing winches at the exit section of the pipe being remediated. 

Smartpipe is designed for up to a 50 year life in the field. 

The general rule of thumb is that the host pipeline will be reduced by one nominal diameter size.